Engine Specifications
| Specification |
Details |
| Engine Code (Part Code) |
5VZ (5VZ-FE) |
| Engine Family |
Toyota VZ Engine Series |
| Engine Size |
3.4L (3,378 cc) 60° V6 |
| Aspiration & Fuel |
Naturally Aspirated / DOHC 24-Valve / Multi-Point Fuel Injection (MPi) |
| Mileage / Condition |
Used Low-Mileage Import / Tested (Approx. 50,000–70,000 KM) |
| Testing Status |
Compression Tested, Leak-Down Tested & Steam Cleaned |
| Parts Included |
Complete Engine Assembly with Attached Core Accessories |
| Core Charge |
$0 (No Core Return Required) |
Product Overview & Fitment Highlights
Restore rugged 3.4L V6 power and legendary bulletproof reliability to your Toyota truck or SUV with a hand-picked, low-mileage 5VZ-FE complete engine assembly—compression tested, steam cleaned, and verified for strong mechanical health.
Why Choose This Engine?
-
Low-Mileage Condition: Sourced with low average kilometers (approx. 50K–70K KM) to ensure maximum remaining operational life.
-
Fully Tested: Units undergo compression and leak-down testing across all 6 cylinders prior to listing to check cylinder pressures.
-
Direct OEM Replacement: Original Toyota 3.4L V6 engine assembly designed for direct drop-in setup.
-
No Core Return: Keep your old engine block! We do not charge core fees or require trade-ins.
General Vehicle Fitment Reference
-
Engine Variations & Applications:
-
1995–2004 Toyota Tacoma (3.4L V6)
-
1996–2002 Toyota 4Runner (3.4L V6)
-
2000–2004 Toyota Tundra (3.4L V6)
-
1995–1998 Toyota T100 (3.4L V6)
-
JDM Imports: Fits Toyota Land Cruiser Prado (VZJ90 / VZJ95), Hilux Surf, Granvia, and HiAce 3.4L models.
-
VIN & Swap Verification Recommended: JDM import engines may feature different oil pan sump positions (front sump vs. rear sump for 4WD USDM models), oil dipstick tube placements, or EGR setups. Call us at 403.471.7150 or send us your VIN so we can verify exact matching before shipping!
Components Included vs. Accessories to Transfer
Engines are sold as complete assemblies (photos may show a representative unit) , including attached intake and exhaust core accessories. However, because electrical plug configurations, emissions setups, and sensor layouts vary by year and market, plan to swap your original sensors and harness if necessary:
| Included (Attached Core Accessories) |
Transfer / Swap From Original Engine |
| Engine Block & Cylinder Head Assembly |
Vehicle Engine Wiring Harness & ECU
|
| Intake Manifold & Throttle Body Assembly |
Sensors (USDM Crank/Cam Sensors, Knock Sensors)
|
| Fuel Rail & Injectors |
Vehicle Emissions & Vacuum Lines |
| Exhaust Manifold Headers & Valve Covers |
Alternator, AC Compressor & Power Steering Pump (If different)
|
| Timing Cover, Oil Pan & Water Pump |
Starter Motor & Oil Pan/Dipstick (If swapping 2WD/4WD JDM unit)
|
Compatible Models & Years
| Model |
Year Range |
Drivetrain |
Notes |
| Toyota Tacoma |
1995 – 2004 |
RWD / 4WD |
USDM / CDM |
| Toyota 4Runner |
1996 – 2002 |
RWD / 4WD |
USDM / CDM |
| Toyota T100 |
1995 – 1998 |
RWD / 4WD |
USDM / CDM |
| Toyota Tundra |
2000 – 2004 |
RWD / 4WD |
USDM / CDM |
| Toyota Land Cruiser Prado |
1996 – 2002 |
4WD |
JDM / Global |
| Toyota Granvia / HiAce |
1995 – 2002 |
RWD / AWD |
JDM |
Unsure About Compatibility?
Vehicle options, trims, and engine splits can vary. Before placing your order, please contact us with your VIN (Vehicle Identification Number) or send it to us before ordering. Our team will verify exact block, head, and sensor compatibility for your specific vehicle.
Installation & Peripheral Swap Notice:
-
Sensor & Harness Swaps: Depending on your vehicle’s exact market, trim, and emission specs, your installer may need to transfer your original engine’s sensors, intake manifold, wiring harness, or oil pan to match your factory ECU.
Disclaimer: This compatibility table is provided for reference purposes only. It is the buyer/installer’s responsibility to confirm that the engine code listed in the specifications above matches their existing vehicle setup prior to installation.
