Engine Specifications
| Specification |
Details |
| Engine Code (Part Code) |
2AZ (2AZ-FE / 2AZ-FSE / 2AZ-FXE) |
| Engine Family |
Toyota AZ Engine Series |
| Engine Size |
2.4L (2,362 cc) Inline 4-Cylinder |
| Aspiration & Fuel |
Naturally Aspirated / Multi-Point Injection (2AZ-FE) / Direct Injection (2AZ-FSE) / Hybrid Atkinson (2AZ-FXE) |
| Mileage / Condition |
Used Low-Mileage Import / Tested (Approx. 50,000–70,000 KM) |
| Testing Status |
Compression Tested, Leak-Down Tested & Steam Cleaned |
| Parts Included |
Complete Engine Assembly with Attached Core Accessories |
| Core Charge |
$0 (No Core Return Required) |
Product Overview & Fitment Highlights
Restore dependable performance and fuel efficiency to your Toyota or Scion with a hand-picked, low-mileage 2AZ 2.4L complete engine assembly—compression tested, steam cleaned, and verified for strong mechanical health.
Why Choose This Engine?
-
Low-Mileage Condition: Sourced with low average kilometers (approx. 50K–70K KM) to ensure maximum remaining operational life.
-
Fully Tested: Units undergo compression and leak-down testing prior to listing to check cylinder pressures across all four cylinders.
-
Direct OEM Replacement: Original Toyota 2.4L 4-cylinder engine assembly designed for direct drop-in setup.
-
No Core Return: Keep your old engine block! We do not charge core fees or require trade-ins.
General Vehicle Fitment Reference
-
Engine Variations:
-
2AZ-FE (Standard MPi): Multi-Point Fuel Injection / VVT-i (Fits 2002–2009 Toyota Camry, 2002–2008 Solara, 2001–2007 Highlander, 2004–2008 RAV4, 2005–2010 Scion tC, 2008–2015 Scion xB, 2009–2013 Matrix / Corolla XRS 2.4L).
-
2AZ-FSE (Direct Injection D4): Direct Injection (Fits select JDM Toyota Avensis, Caldina, Mark X Zio).
-
2AZ-FXE (Hybrid Atkinson Cycle): Electric-Hybrid specific camshafts and pistons (Fits 2007–2011 Camry Hybrid, Estima Hybrid, Alphard Hybrid).
-
VIN & Variant Verification Recommended: Intake manifold material (metal vs. composite), throttle body drive type (cable vs. drive-by-wire), and EGR valve configurations vary depending on the exact year and model. Call us at 403.471.7150 or send us your VIN so we can confirm exact matching before shipping!
Components Included vs. Accessories to Transfer
Engines are sold as complete assemblies (photos may show a representative unit) , including attached intake and exhaust core accessories. However, because electrical plug configurations, emissions setups, and sensor layouts vary by year and market, plan to swap your original sensors and harness if necessary:
| Included (Attached Core Accessories) |
Transfer / Swap From Original Engine |
| Engine Block & Cylinder Head Assembly |
Vehicle Engine Wiring Harness & ECU
|
| Intake Manifold & Throttle Body Assembly |
Sensors (USDM Crank/Cam Sensors, Knock Sensor)
|
| Fuel Rail & Injectors |
Vehicle Emissions & Vacuum Lines |
| Exhaust Manifold & Timing Cover |
Alternator, AC Compressor & Power Steering Pump (If different)
|
| Valve Cover & Oil Pan Assembly |
Starter Motor |
Compatible Models & Years
| Model |
Year Range |
Drivetrain |
Notes |
| Toyota Camry |
2002 – 2009 |
FWD |
2AZ-FE |
| Toyota Camry Hybrid |
2007 – 2011 |
FWD |
2AZ-FXE Hybrid |
| Toyota RAV4 |
2004 – 2008 |
FWD / AWD |
2AZ-FE |
| Toyota Highlander |
2001 – 2007 |
FWD / AWD |
2AZ-FE |
| Toyota Matrix / Corolla XRS |
2009 – 2013 |
FWD / AWD |
2AZ-FE |
| Toyota Solara |
2002 – 2008 |
FWD |
2AZ-FE |
| Scion tC |
2005 – 2010 |
FWD |
2AZ-FE |
| Scion xB |
2008 – 2015 |
FWD |
2AZ-FE |
| Lexus HS250h |
2010 – 2012 |
FWD |
2AZ-FXE Hybrid |
| Toyota Alphard / Vellfire / Estima |
2000 – 2014 |
FWD / AWD |
JDM |
Unsure About Compatibility?
Vehicle options, trims, and engine splits can vary. Before placing your order, please contact us with your VIN (Vehicle Identification Number) or send it to us before ordering. Our team will verify exact block, head, and sensor compatibility for your specific vehicle.
Installation & Peripheral Swap Notice:
-
Sensor & Harness Swaps: Depending on your vehicle’s exact market, trim, and emission specs, your installer may need to transfer your original engine’s sensors, intake manifold, wiring harness, or oil pan to match your factory ECU.
Disclaimer: This compatibility table is provided for reference purposes only. It is the buyer/installer’s responsibility to confirm that the engine code listed in the specifications above matches their existing vehicle setup prior to installation.
